Producto

Stainless Steel Sheet and plate

provide superior corrosion resistance, high tensile strength, and exceptional surface quality across a comprehensive range of marine, chemical, food processing, architectural, and heavy industrial applications.

Stocked from thin gauge sheets (.018" – .187") to thick structural plates (.187" – 4.0"+) in 304/304L, 316/316L, Duplex 2205, 430, and heat-resistant alloys.

Cut-to-size using fiber laser, HD plasma, waterjet, and precision plate sawing, delivering square edges, tight tolerances (+/- .005"), and minimal heat-affected zones.

High-molybdenum 316L and Duplex alloys engineered to prevent pitting, crevice corrosion, and stress-corrosion cracking in harsh saltwater exposure.

Supplied in 2B (smooth matte), No. 4 (brushed directional), No. 8 (mirror polish), and No. 1 HRAP (hot-rolled annealed & pickled), available with laser-compatible PVC film protection.

Product Line / Series	Primary Applications	Thickness & Size Range	Alloy Grade & Surface Finish	Standards & Compliance
Phoenix Marine Stainless Sheet & Plate (316 / 316L Grade)	Ship Hull Plating, Sea Chests, Marine Exhaust, Tanks & Hardware	.018" – 3.00"+ / 48"x96", 60"x120", 72"x240", 96"x240"	316 / 316L / 2B Finish / No. 1 HRAP	ASTM A240 / ASME SA240 / ABS / DNV
Phoenix Commercial Sanitary Sheet & Plate (304 / 304L Grade)	Food & Beverage Vessels, Commercial Kitchens, Hoppers & Enclosures	.018" – 4.00"+ / Standard & Custom Sawed Blanks	304 / 304L / 2B Finish / No. 1 HRAP	ASTM A240 / NSF / RoHS Compliant
Phoenix Architectural Polished Sheets (No. 4 Brushed / No. 8 Mirror)	Building Cladding, Elevator Interiors, Column Covers & Decorative Trim	.024" – .125" Thickness / 48"x96", 48"x120", 60"x120"	304 / 430 / No. 4 Brushed / No. 8 Mirror / Laser PVC Film	ASTM A240 / ASTM A480
Phoenix Duplex Heavy Structural Plate (Alloy 2205 / 2507)	Offshore Oil & Gas Platforms, Desalination Pressure Vessels & Shafting	.187" – 3.00"+ / Custom Waterjet & Sawed Blanks	2205 Duplex / 2507 Super Duplex / No. 1 HRAP	ASTM A240 / NACE MR0175 / DNV
Phoenix Heat-Resistant Stainless Plate (310S / 321 Grade)	Furnace Retorts, Thermal Equipment, Boilers & Exhaust Systems	.187" – 2.00" Thickness / Standard Plates & Blanks	310S / 321 / 2B Finish / No. 1 HRAP	ASTM A240 / ASME SA240

Solicitar cotización

Diseño

Precision-sheared flat sheets, heavy structural plate, plasma/laser/waterjet cut blanks, polished architectural sheets, and stainless floor/tread plate.

Aplicación

Marine & Offshore Engineering: Ship hull plating, deckhouses, sea chests, rudder stocks, exhaust manifolds, and marine hardware (Alloys 316/316L, Duplex 2205).
Sanitary, Food & Chemical Processing: Storage vessels, mixing tanks, commercial kitchen counters, piping flanges, and pharmaceutical equipment (Alloys 304/304L, 316L).
Architectural & Commercial Construction: Exterior wall cladding, elevator interiors, column covers, decorative trim, and transit paneling (Alloys 304, 430 - No. 4 / No. 8 Mirror Finish).
Power Generation & Heat Transfer: Heat exchangers, furnace components, boilers, pollution scrubbers, and high-temperature ductwork (Alloys 310S, 321).

Type Key

Artículo	Descripción
Plate Example	PHX-SSP-316L-2B-0250-4896
PHX	Brand Identifier (Phoenix Metals)
SSP	Product Category (Stainless Steel Sheet & Plate)
316L	Alloy Grade (316L Marine / Low-Carbon Chemical Grade)
2B	Surface Finish (2B Cold Rolled / Smooth Matte)
0250	Thickness (0.250 Inches / 1/4" Plate)
4896	Dimensions (48" Width x 96" Length / Custom Cut Available)

Materiales

Austenitic Grades: 304, 304L, 316, 316L, 309, 310S, 321
Duplex & Ferritic Grades: 2205 Duplex, 2507 Super Duplex, 430
Surface Finishes: 2B, No. 4 Brushed, No. 8 Mirror, No. 1 HRAP (Hot Rolled Annealed & Pickled), Bright Annealed (BA)
Protective Lamination: Single/Double Laser PVC Film, PE Protective Film, Paper Interleaving

Construcción

Roller-Leveled Flatness: Tension-leveling and stretcher-leveling to eliminate internal stresses, preventing oil-canning or warping during cutting and welding
Precision Cut Edges: Fiber laser, HD plasma, waterjet, or sawed square edges prepared for immediate joint welding
Controlled Carbon Chemistry (L-Grades): Low-carbon chemistry (304L / 316L) preventing chromium carbide precipitation during welding to preserve intergranular corrosion resistance at heat-affected zones

Scope of delivery

Standard Stock Sizes or Custom Cut Blanks: Standard sheet/plate sizes (48"x96", 48"x120", 60"x120", 60"x144", 72"x240", 96"x240") or custom-machined profile blanks
Protective Export Packaging: Heavy-duty wooden skids, moisture-barrier wrapping, edge protection guards, steel banding
Full Certification Package: Complete Mill Test Reports (MTR) meeting ASTM A240, ASME SA240, ABS, DNV, and NACE MR0175 standards

¿No encuentra la pieza que necesita?

Díganos qué busca y le responderemos con un precio.

Solicitar cotización

Hablar con ventas