Axially split pump

SCP

An energy-efficient, axially split pump designed to deliver high-volume flows reliably through extensive distribution networks.

Replace bearings and seals without disconnecting system piping.

Optional double-suction design engineered for peak energy efficiency.

Double-suction impeller engineered to balance axial thrust and protect internal components.

Advanced neck ring design eliminates binding of internal rotating components.

Product description	Nominal flange diameter	Shaft seal type	Article number
SCP 3 x 2 x 7 HA	3" 125# ANSI	AQ1EGG	SCP_3_x_2_x_7_HA_0015
SCP 4 x 3 x 7-1/2 HA	4" 125# ANSI	AQ1EGG	SCP_4_x_3_x_7-1_2_HA_0030
SCP 5 x 4 x 10-1/2 HA	4" 125# ANSI	AQ1EGG	SCP_5_x_4_x_10-1_2_HA_0100
SCP 6 x 5 x 11 HA	6" 125# ANSI	AQ1EGG	SCP_6_x_5_x_11_HA_0200
SCP 8 x 6 x 13-1/2 HA	8" 125# ANSI	AQ1EGG	SCP_8_x_6_x_13-1_2_HA_0400
SCP 10 x 8 x 14 HA	10" 125# ANSI	AQ1EGG	SCP_10_x_8_x_14_HA_0500
SCP 12 x 10 x 14 HA	12" 125# ANSI	AQ1EGG	SCP_12_x_10_x_14_HA_1000
SCP 14 x 12 x 15 HA	14" 125# ANSI	AQ1EGG	SCP_14_x_12_x_15_HA_1500
SCP 16 x 12 x 18 DS	16" 125# ANSI	AQ1EGG	SCP_16_x_12_x_18_DS_3000
SCP 18 x 14 x 18 HA	18" 125# ANSI	AQ1EGG	SCP_18_x_14_x_18_HA_2000
SCP 20 x 16 x 19 HA	20" 125# ANSI	AQ1EGG	SCP_20_x_16_x_19_HA_2000

Solicitar cotización

Diseño

Horizontal split case, single and two stage, base mounted centrifugal pump

Aplicación

Heating and Cooling Systems
Transfer and Pressure Boosting
Boiler Feed/Condensate
Municipal Water Supply
Irrigation
Industrial Applications
Max. Flow: 5,000 GPM
Max. Head: 180 feet

Equipment/function

Horizontal split casing allows replacement of bearings and mechanical seal without disturbing the system piping

Double suction design available for maximum efficiencies

Hydraulically balanced double-suction impeller for minimal axial thrust

Tongue & groove neck ring design eliminates seizing of rotating assembly

Pump shaft guards

Type Key

SCP 3 x 2 x 13 DS
SCP	Split Case Pump
3	Suction (inlet) flange size (inch)
2	Discharge (outlet) flange size (inch)
13	Impeller diameter max
HA	Standard type A
HB	Standard type B
HS	Single stage hydraulic
DS	Two-stage hydraulic
DV	Double Volute

Technical Data

Power supply: 208-230/460/3/60 and 575/3/60 Volt
Fluid temperature range: 18 to 250 °F (-8 to +120 °C)
Operating pressure: 250 PSI (16 Bar) or 363 PSI (25 Bar)
Suction flange size range: 2 1/2" to 20", Class 125 ANSI type
Discharge flange size range: 2" to 16", Class 125 ANSI type
Maximum Head: 180'
Maximum flow: 5000 USGPM
Max Hp: 500 Hp

Materiales

Pump housing: ASTM A48 Class 35 gray cast iron

Impeller: ASTM B584 C83600 Leaded Tin Bronze

Shaft; AISI 410 Stainless Steel

Construcción

Pump end only (bare shaft pump) or
Pump, base, coupling and coupling guard or
Complete assembly (pump, base, coupling, guard and motor)
Installation and operating instructions

Scope of delivery

Pump End Only (Bare Shaft Pump)
Pump, Base, Coupling and Coupling Guard or
Complete Assembly (Pump, Base, Coupling, Guard, and Motor)
Installation and operating instructions

Opciones

Automatic pump control via WILO CC HVAC Controller
Higher flows up to 15,400 USGPM, 70,000 USGPM as special version
Special motor (6000V, 10 000 V etc.)
Special construction
- Impeller: Lead free bronze, grey cast iron, stainless steel
- Housing: Grey cast iron, ductile iron, Ni-resist cast iron, stainless steel

¿No encuentra la pieza que necesita?

Díganos qué busca y le responderemos con un precio.